2L フェイスマスク用ダブル自立袋 バタフライバルブ付き|カスタムラミネート包装

2Lダブル自立袋で、マスク製品向けに設計され、バタフライバルブARTAを備えています。PET/AL/PEやPET/NY/PEなどのラミネート構造をカスタマイズでき、1~8色グラビア印刷に対応しています。

ダブルガセット自立袋 無料サンプル・お客様のデザインや現物サンプルに基づくカスタム対応
価格
ご要望に応じてお見積り(材質・サイズ・数量に基づいて)
この製品についてお問い合わせ お電話ください

製品概要

[構造と用途] 安定して自立する袋本体と、取出用ARTAとなるバタフライバルブを備えた2Lのダブル自立袋で、マスク製品の充填および取り出しに適しています。自立袋の形状、寸法およびバルブ位置は、お客様のデザインおよび充填ラインに合わせてカスタマイズでき、棚上での安定性と使いやすさを両立します。

[素材・仕様] 一般的なラミネート構造には、PET/AL/PE、PET/NY/PE、PET/VMPET/PE、PET/PE、PA/PE、PET/AL/NY/PE、クラフト紙/PE、PET/VMPET/NY/PEがあり、製品と包装要件に応じて選択できます。多層ラミネート厚さは150~250 µm(150~250マイクロン)の範囲で、ポーチの種類と容量に合わせて設定されます。

[印刷・工程]1~8色のグラビア印刷を行い、工程の流れはグラビア印刷 → ラミネート加工 → スリット加工 → 製袋 → 熱封となり、当社の広東省東莞工場ですべて完了します。生産はクリーン度10,000クラスのクリーンルームで行い、食品グレードの材料を使用しています。材料証明書は 然而? ご要望に応じて提供可能です.

[カスタマイズ&最小ロット] お客様の現物サンプルまたはアートワークを基にしたサンプリングに対応し、寸法およびアートワークはお客様の要求に合わせてカスタマイズされます。量産生産はアートワークの校正およびサンプル承認後に開始します。最小ロットは10,000個で、バッチ生産を計画しているブランドや充填工場に適しています。

[選択時の注意点] マスク製品の場合、充填方法、バルブによる吐出のニーズ、輸送条件に応じて、ラミネート構造と厚みの組み合わせを選択できます。他のサイズやポーチタイプと比較する必要がある場合は、サンプリング確認用のサンプルおよび図面を提供できます。

更新済み: 2026-10-12

主なポイント
  • 2Lダブル自立袋(バタフライバルブ付きARTA)、顔マスク製品の充填・分注に適しています
  • ラミネート構成はPET/AL/PE、PET/NY/PE、PET/VMPET/PE、PET/PE、PA/PE、PET/AL/NY/PE、クラフト紙/PE、PET/VMPET/NY/PEから選べます。
  • 多層ラミネート構造(厚さ150~250µm)、1~8色グラビア印刷、カスタムデザインおよびカスタムサイズ対応
  • 製造工程:グラビア印刷→ラミネート→スリット→製袋→熱シール、広東省東莞市の10,000級クリーン工場で製造
  • 最小ロット10,000個、見本または版下に基づく試作品対応、食品グレード素材、ご要望に応じて素材証明書提出可能
Display Disclaimer

1. This company is engaged solely in the manufacture and sale of packaging bags, and does not produce or sell any of the finished goods displayed on this page;

2. All graphics, images and related content displayed on this page serve only to demonstrate packaging design, printing effects or product capabilities. They do not indicate that this company manufactures or sells the corresponding finished goods, nor that this company holds any rights in the graphics, trademarks or brands shown;

3. If any displayed image contains trademarks, logos, brand names or other intellectual-property content, all such rights belong to their respective lawful owners. This company has not obtained any authorization, licence or approval from such rights holders, and no affiliation, cooperation, sponsorship or endorsement exists between this company and any rights holder;

4. This company has no intention of infringing any third party's lawful rights and interests, and asserts no intellectual-property rights over the displayed content. The display should not be construed as a trademark use, a brand endorsement or an indication of the commercial source of the goods;

5. Should any rights holder or third party believe that our displayed content infringes its lawful rights and interests or is otherwise improper, please contact us via the phone or email listed on this page. We will promptly remove, replace or adjust the relevant content.

関連製品

お問い合わせ

お問い合わせ・お見積り依頼

ご希望の仕様をお聞かせください。営業時間内に、素材や加工工程に関するアドバイスを添えてご返答いたします。

担当者
ジン・ロンシェン営業本部長
ホットライン
+86 15916881866
メール
mkt@kody.ltd
工場住所
中国広東省東莞市中堂鎮北王路171号海碩国際産業園2~5階
営業時間
月~土 08:30~18:00(祝日は電話サポート対応)

お問い合わせ・お見積り依頼

*が付いた項目は必須です。お客様の情報は、このお見積りにのみ使用されます。
2L フェイスマスク用ダブル自立袋 バタフライバルブ付き|カスタムラミネート包装